Product Overview
We've partnered up with Milwaukee Dave from Makerworld to bring you another range of Packout inserts, there's a wide variety of inserts for drawers, organisers & toolbox's to house a whole range of tools.
Most of these are compatible with either Jonah's TRIO Inserts or Jonah's Half Width Inserts
£5 of every insert sold goes to Milwaukee Dave
8x 5ah M18 Battery Holder
A simple but effective design for holding 8 x 5,4 or 3Ah M18 Batteries in the 2 drawer Packout system
12ah M18 Battery Holder
Due to the size of the 12, 9, 8 and 5.5Ah batteries storage is a little more difficult, this organiser fits 2 x 12Ah, 1 x 8 or 5.5Ah and 1 9Ah battery or can just be used as an organiser.
5x 6ah M12 Battery Holder
This insert will store 5 x 4,6 or 5Ah high output M12 batteries, this will match my other designs for those like myself who want things to match
This is for the 2 or 3 drawer Packout system
6x 2ah M12 Battery Holder
Slim 65mm insert for 6 X 2Ah batteries, fits nicely into the gap if you have a ½ and a â…“ insert for tools from Jonah Pope for example.
Spanner Wrench Organiser
Here we have a design for the Spanner/Wrench set for the Packout 2 and 3 drawers.
M12 Fuel Ratchet
Slim organiser for the M12 fuel 3/8 ratchet, I wanted to design a simple slim organiser for the tool only to save space or to fill the gap for those who have a ½ and a â…“ size tool organiser, these fit the centre section of the 2 and 3 drawer Packouts.
M12 3/8" Impact Gun
M12 Impact wrench organiser for the 2 or 3 drawer Packout system, this design is for the tool only, I am trying to use the drawer system to get as much in as possible.
This is for the Gen2 not the Gen 3... M12 FIW38-0
M12 Fuel Planer
Packout insert for the M12 Planer within the 2 drawer Packout system, this design is for the left side of the 2 drawer system and is for the tool only or with a 2A battery, as there is virtually nothing extra needed for the planer (spare blades stored within the tool) I felt no need for loads of extra storage and instead kept the design minimal, I have added a small pocket below where the blades are just in case you forget to wind them in, also specific storage for the Vac adaptor.
M12 Cut Off Tool
Packout drawer organiser for the M12 cutoff tool, this organiser fits the 2 or 3 drawer packout system and fits only on the left, I have tried to get as much storage related to the tool as possible with a specific place for the allen key so at least you know when you've lost it.
There are 2 small bins for the blades which are slightly different sizes and also a separate file for the blade reel. As you see from the pictures it happily fits a 6.0Ah battery but will also fit a 6ah and a 2ah if you don't use the reel
M12 Fuel Jigsaw
Insert will fit either 2 or 3 drawer Packout system and there are designs for both left or right side
There is storage space for dust extractor tube, clear blade guard and small storage below the blade storage, the top compartment is for blades and will fit blades up to 152mm long, the top is just a basic lid that is held in place by friction alone and is just to stop blades bouncing out while in transport it does not click into place for a secure closure, there is space for batteries.
There is space below the handle for ease of removal and can also store some small packs of blades if required.
M12 Fuel SDS
Insert for the 2 or 3 drawer Packout system.
New drawer designs have been redesigned to fit both left and right and 2 or 3 drawers so there is now just one to fit both. There is space for some drill bits and or a battery and a small holder to fit in the space that will hold 3 drill bits.
Unfortunately there is no dedicated space for the handle as it is just a little too large to allow a good solid design.
M12 Fuel Multitool
M12 Multitool insert for either 2 or 3 drawer Packout system.
As with his new designs this file will fit either left or right.
Gland / Pump Plier Organiser
There are 6 slots… 4 X 18mm,1 X 15mm and 1 X 13mm and will take up to 300mm long. Will work on either left or right.
M18 Fuel 1/2" or 3/8" Impact Gun
Here's a simple design for the M18 ½" or 3/8" Impact wrench insert for the 2 or 3 drawer Packout System, there is space for a battery or other small storage.
