Product Overview
Ares Striker Buffer tube stock for Ares Striker AS01/02/03 airsoft gun. Printed in Carbon Fibre PETg.
There have been one case where this adapter didn't fit AS02 receiver. You may need to sand / file this down to get it to fit how you want, this is possible as its printed at 100% infill.
You need:
- M4 airsoft buffer tube
- M4 buffer tube stock
- M4 pistol grip
- 4x M3 screws for the grip
- epoxy glue for installing the grip permanently in place (optional)
- black acrylic paint to mix with epoxy (optional)
- DIN6334 M5 coupling nut (15x8mm "long" nut)
- DIN912 M5x60 screw for stock (optional but makes the print much stronger)
- DIN912 M4x30 screw for grip (optional but makes the print much stronger)
You don't need:
- Plastic safety cover piece on the right side of the trigger box.
- Metal cover, spring and the small metal piece on the left side of the trigger box.
We do not own the rights to this design, if you want to get this printed by someone else or print it yourself please see the link below to the original files.
https://www.thingiverse.com/thing:4618383
